D-MAX DCC-601DV Manuel d'instructions

Digital Day & Night Color Dome Camera 사용 설명서 용 서 DCC-601DV MANUAL

10 1) Installation 2) Dimension 4. Installation & Dimension

11 1) Menu Structure SETUP MENU 1. LENS • DC • VIDEO • MANUAL 2. EXPOSURE • SHUTTER • AGC • SENS-UP • RETURN 3. WHITE BAL ATW • ATW • MANUAL • A

12 ● Manual : Select Manual Lens ② Exposure 1. When the SETUP menu screen is displayed, select EXPOSURE by using the Up and Down buttons so t

13☞Note • To produce better results with A.FLK, do not use it in conjunction with the WDR mode of the BACKLIGHT menu. • When the SHUTTER is set to E

14Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is displayed, select ‘White Bal.’ by using the Up and Dow

15④ Backlight This camera is designed so that it delivers a distinctive subject and background at the same time, even when the subject is in back

16 • Select ‘BLC’ to adjust the area to be enhanced by the WDR function. ☞ Note • You cannot use the WDR mode when MANUAL or A.FLK mode in ‘SHUT

17 ☞Note • You cannot set the DNR to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE menu is ‘OFF’. • When adjusting the noise reduction level of th

18 ● EXTERN: This mode allows you to apply a desired filter to external signals. ☞ Note • When using a Video Auto Iris Lens, if you set the lens lev

19 ● FREEZE : You can view still or moving pictures. ● V-REV : You can flip the picture vertically on the screen. ● H-REV : You can flip the picture

The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dan

20 1. When the SETUP menu screen is displayed, select ‘IMAGE ADJ.’ by using the Up and Down buttons so that the arrow indicates IMAGE ADJ. 2. Sele

21☞Note • When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if you enter one. ③ Press the SET butt

22 ● SYNC : In areas where the supply is at 60Hz, you can synchronize the output phase of multiple cameras using the power synchronization funct

23- SEL POS : Determines which of the 4 vertices of each MD area is to be used. - YPOS : Determines the coordinate of the vertical axis for SEL POS.

24- UART MODE : You can select NONE, EVEN or ODD for the parity bits. - RET PKT : Determines whether to send a command back to the controller device

25 If there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product

26 SIGNAL SYSTEM NTSC PAL TOTAL / EFFECTIVE PIXEL 410K / 380K Pixels 470K / 440K Pixels IMAGE SENSOR Diagonal 6mm (1/3") Sony DS CCD

27

3 The camera needs periodic inspection. Contact an authorized technician for inspection. Stop using your camera when you find a malfunction. If you

4 Precautions

5

6 1.Features --------------------------------- 7 2. Components & Cable Connection --------------------------------- 8 3. Names and function

7 ☺Horizontal Resolution 560 TVLines Clear image quality has been achieved by employing a SONY CCD with 410,000 (effective) pixels, which provides

8 1) Components 2) Cable Connection 2. Components & Cable Connection

9 1) Names 2) Functions ① 3AXIS BRACKET - Please loosen screws and fix tilted and panned position. ③ LENS : Vari-Focal Auto Iri